For contractors, farms and anyone running more than one brand of machine

Find the money your fleet is quietly losing.

Verrum reads the data your machines already send, joins it to your costs, and keeps one page current around the clock: what's idling, what to rent instead of own, which repairs aren't worth it, and which hours landed on the wrong job or field.

We don't sell machines, parts or repairs, so we can tell you when to stop repairing.

Reads
Caterpillar, Komatsu, Case IH, New Holland, Bobcat, and any brand with the standard ISO 15143-3 feed.
Built for
Contractors and farms. An excavator and a tractor send the same hours, fuel and location; the page says job or field, whichever you say.
  • Free pilot: no cost, no contract
  • Read-only access you can revoke
  • Your data is never shared or sold
DecisionsSample data
Sample data · simulated fleet
$4,393a month you could save (sample)
3decisions waiting
Fix or replace · BH-207
BH-207 costs more to fix than to rent

$4,008 a month on repairs over the last year. Renting one costs $2,900 a month.

$4,008a month on repairs · sample
Next step Get a replacement quote before approving the next repair over $5,000.
Idling · EX-104
EX-104 is idling too much
$385a month · sample
Wrong job · EX-109
EX-109's hours are going to the wrong job
$4,336last 14 days · sample
Sample data. This is a contractor's simulated fleet of 35 machines that we use for demos, not a customer's results. The farm demo shows tractors, combines and fields. Your page shows your own machines and your own numbers.

What Verrum does

From every brand's website to one page.

Every machine already sends its hours, fuel and location. Every brand keeps them on its own website.

Verrum reads them all and lines the machines up on one list, under your own unit numbers.

Then it says what the numbers mean, in dollars, with one next step.

Sample fleet. Simulated data, not a customer's results.

The product

One fleet, one page, one decision.

Real screens from the demo fleet, setup to month end. Sample data, not a customer's results.

The data is already there. Nobody has time to read it.

  1. 01

    Four brands, four websites

    Each brand has its own telematics site, login and definitions. Nobody reads them all, so the numbers you already pay for go unused.

  2. 02

    Big calls, made from memory

    Still own it? Should we have rented? Is the next repair worth it? Did the cost land on the right job? Usually answered by gut feel.

  3. 03

    A second opinion with nothing to sell

    Your dealer knows your machines, and also sells the repairs and the replacements. We sell neither, so our only job is the honest call.

How it works

Three steps. Nothing to install.

  1. 1

    Connect what you already have

    Approve read-only access to the data your machines already send. Most major brands use the same standard (ISO 15143-3, also called AEMP 2.0), and we write the email to your dealer for you. No telematics? Send a spreadsheet.

  2. 2

    See one fleet, in your own words

    Every machine from every brand on one list, under your own unit numbers and job or field names, with an honest view of which machines aren't reporting.

  3. 3

    Decide when it comes up

    One page, current around the clock: each finding in plain words, what it costs, one next step. You answer Do it, Not now or No. Two weeks later we check whether it worked, and remember it next time.

What you get

Nine questions, answered around the clock, with the dollars attached.

The figures below are sample data from our two simulated demo fleets, a contractor's and a farm's, not customer results.

Idling

Which machines burn fuel standing still, and what that costs you each month. On a farm, a combine waiting on trucks; on a site, an excavator waiting on them.

“HV-14, a combine, is idling 45% of the time the engine runs. Your limit is 35%.”

$403a monthsample

Keep or rent

Owned machines that barely work, and rentals running while your own machine of the same kind sits idle.

“You pay $5,863 a month for a rented excavator, while your own EX-109 worked 1 hour in the same 14 days.”

$5,863a monthsample

Fix or replace

Machines whose repair bills now cost more than renting one, flagged before you approve the next repair.

“BH-207: $4,008 a month on repairs, against $2,900 a month to rent one.”

$4,008a monthsample

Wrong job or field

Hours charged to one job or field while the machine's GPS shows it working on another.

“EX-109 worked at Winters Levee Repair, but its costs go to Dixon Yard.”

$4,336in 14 dayssample

Five more, from the same data:

  • your real cost per hour against the rate you charge
  • service due across every brand
  • fuel bought against fuel burned
  • the same part fixed twice within a few hundred hours
  • what could strand a machine in the field: an open fault code, a service past due, a part near the hours it lasted last time

And the hours go to accounting, on the right job or field.

Approve machine hours and download them as a file for your accounting system, charged to the job or field each machine was actually on.

Numbers you can check.

Every number shows its source

Click any figure to see the meter readings behind it, down to the data the manufacturer sent.

Gaps shown, not hidden

Machines that stop reporting, or never did, are flagged, never counted as zero.

Measured, not predicted

We don't forecast breakdowns. We measure what happened before and after each decision.

Read-only and private

Nothing on your machines can be changed. Cut our access any time without calling us. Your data is never pooled or sold.

About

Who you'll work with

Abimanyu, founder of Verrum
Abimanyu
Founder, Verrum
Based in Northern California
abimanyu@verrumfleet.com

I built Verrum to answer the questions equipment managers usually have to answer from memory: which machines are earning their keep, which ones are costing money, and what to do next.

You work with me directly. I run your demo, set up your pilot, read your numbers and answer your emails myself.

  • No sales agenda. I'm not tied to any dealer or manufacturer, and I don't sell machines, parts or repairs.
  • Your data stays yours. I use it only for your pilot and never sell or share it. You can end my access at any time.
  • A straight answer. If your numbers don't show anything worth acting on, I'll tell you.

The free pilot

Try it on your own fleet. No cost, no contract.

What you give

  • Read-only access to your machine data. We draft the emails to your dealers.
  • The spreadsheets you already have (equipment list, repairs, rental invoices), as they are.
  • A few minutes, whenever a recommendation appears, to read it and answer yes or no.

What you get

  • Every machine from every brand on one page, under your own unit numbers.
  • Recommendations as soon as the data supports them, with the dollars attached, and one next step each.
  • A written summary at the end: what we found, what you decided, and what happened.
  1. Tell us about your fleet2 minutes, below
  2. 1-hour demoon a sample fleet, by video call
  3. Your pilot accountready the same day if it fits

Request a free demo

Request a free demo

Tell us about your fleet.

A few questions about your machines and systems so the demo fits you. About two minutes. We email you within one business day to find a time.

  1. We reply within one business day.
  2. A one-hour video call: the decisions page on a sample fleet, and your questions.
  3. If it fits, we set up your free pilot. You connect your brands, and your decisions page goes live.

Rather write? abimanyu@verrumfleet.com

About you
Your fleet
Which brands do you run? pick all that apply
How many of them send data today (telematics)?
What would help most?

We use this only to set up your demo. It's never shared or sold. Privacy

Questions

Is the pilot really free?

Yes. No cost and no contract. We're building this with a small number of early fleets, and your feedback is what we ask for in return. You can stop at any time.

What do you need from us?

Read-only access to your machine data (we draft the emails to your dealers), the spreadsheets you already have (equipment list, repair history, rental invoices, rates) in whatever shape they're in, and a few minutes whenever a recommendation comes up.

Which brands work?

Any brand that offers the industry-standard data feed (ISO 15143-3, also called AEMP 2.0), including Caterpillar, Komatsu, Volvo CE, Case IH, Case CE, New Holland, Bobcat and Takeuchi, on construction and farm machines alike. Some basic plans leave the feed out (Cat's free “Cat Daily” plan, for example), so we check your fleet machine by machine as soon as it connects. Machines without it, an older tractor or a brand with no feed, come in by spreadsheet and their repair bills still count.

Can you change anything on our machines?

No. The standard only allows reading data. You can cut our access at any time without asking us: in your manufacturer account's connected-applications settings, or by asking your dealer.

Who sees our data?

You, the people you give your access code to, and us, to run your pilot. Each customer's data is kept separate, and it is never combined with anyone else's, sold, or shared.

Do we have to change our software?

No. We read what your machines already send and the files your systems already export. Approved hours go back to your accounting system as a file.

Do you predict breakdowns?

No. The manufacturers and dealers already cover machine health. We answer the ownership questions: keep or rent, fix or replace, and whether the cost landed on the right job or field.

See your fleet on one page.

A one-hour demo, then a free pilot on your own machines.

Request a free demo